Three Openings, One Ring: What the Numbers Mean
The Triple C-Ring 50-37-45MM is a single piece with three connected rings, and each diameter is a separate opening you can use. The numbers are simple: 50mm (1.96 inches), 37mm (1.46 inches), and 45mm (1.77 inches). Because the rings are joined, the size you choose changes both where the ring sits and how the rest of the piece hangs.
This is not a stretchy ring that adapts to you. The supplied product details describe a rigid, non-flexible design with a polished finish, made from stainless steel and weighing 1.4 oz. That rigidity is the main thing to plan around: fit is decided by the opening you pick, not by the material giving way.
What the Product Record Confirms
- TRIPLE C- RING 50-37-45MM: Three connected rings with diameters of 50mm, 37mm, and 45mm (1.96, 1.46, and 1.77 inches). These are the only three fit options on the piece, so choosing well starts with knowing all three measurements.

TRIPLE C- RING 50-37-45MM - TRIPLE C- RING 50-37-45MM: Stainless steel construction with a rigid, non-flexible design and a polished finish. A firm ring holds its shape but will not stretch, so the opening must suit you before wear rather than adjusting during it.
- TRIPLE C- RING 50-37-45MM: Weight: 1.4 oz. The whole piece is light enough that the joined rings should not feel like a heavy load, though the rigid shape still matters more than weight for comfort.
How to Choose Which Opening to Use
The supplied record gives diameters but no fitting chart, body-compatibility guidance, or recommended wear time. Use the steps below as a way to compare the three openings against your own experience, not as a manufacturer sizing rule.
- Start with the 50mm opening if you are unsure: At 1.96 inches, it is the largest of the three and leaves the most room. Treat it as the low-pressure starting point for a first try.
- Compare the 45mm opening as the middle option: At 1.77 inches, it sits between the other two. If the 50mm feels looser than you want and the 37mm seems too snug, this is the opening to test next.
- Reserve the 37mm opening for a deliberately snug fit: At 1.46 inches, it is the smallest opening on the piece. Because the ring is rigid, choose it only if you already know a firm, close fit suits you.
- Check how the joined rings sit, not just the opening: The three rings are connected, so the unused rings remain part of the piece. Notice whether they press or pull before you settle on a size.
Fit Checkpoints Before and During Wear
The product record does not include a safe-wear procedure or a maximum wear time, so these are practical checkpoints rather than instructions from the manufacturer.
- Test the fit briefly first: Try the chosen opening for a short period before relying on it, and switch to a larger opening if the fit feels wrong.
- Watch for numbness, pain, or color change: A rigid ring cannot loosen on its own. If anything feels numb, painful, or changes color, remove the ring rather than waiting.
- Remember the ring will not stretch: The supplied details describe a non-flexible design, so do not count on the material easing up over time.
- Keep the extra rings in mind: The connected rings add bulk and contact points. Check that they are not creating pressure where you did not expect it.
Cleaning the Polished Stainless Steel
The product details list easy cleaning and a polished finish, but the supplied record does not include specific cleaning agents, temperatures, or compatibility instructions. What the record does tell you is the material: stainless steel with a polished surface. That makes a simple approach reasonable — rinse and clean the ring after use, and dry it before storing it. For anything beyond that, confirm the cleaning method with the seller or the packaging rather than assuming a particular product or routine is approved.
The same caution applies to lubricants and other products used with the ring. The supplied information does not confirm compatibility with any specific lubricant or cleaner, so check before applying something new to a polished metal surface.
What the Triple C-Ring Is and Is Not
The catalog describes the Triple C-Ring 50-37-45MM as supporting firmness and endurance and as suitable for prolonged use, and it lists a comfortable fit. Those are the manufacturer's claims, not guarantees for every wearer. What the record does not provide is equally important: there is no sizing chart, no body-compatibility guidance, and no stated wear limit. That means the three diameters are your main decision tool, and your own comfort is the final check.
If you want a ring that adjusts or stretches, this is the wrong piece — the rigid stainless steel design is the point. If you want one ring with three fixed openings to compare, the 50-37-45mm layout gives you a large, middle, and small option in a single 1.4 oz piece.


